LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Measure the resistance of the shift solenoid valve.
Standard resistance:
(b) If the resistance is not within the specified range, replace the shift solenoid valve SLT.
(c) Connect the battery's positive (+) lead with a 21 W bulb to terminal 2 and the negative (-) lead to terminal 1 of the solenoid valve connector.
Then check that the valve moves and makes an operating noise.
OK:
Valve moves and makes operating noise.
9. INSPECT SHIFT SOLENOID VALVE SR
(a) Measure the resistance of the shift solenoid valve.
Standard resistance: