LS 460 RWD V8-4.6L (1UR-FSE) (2010)
/Page-1521007.png)
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Apply 12 V battery voltage to the shift solenoid valve and check that the valve moves and makes an operating noise.
OK:
(c) If the result is not as specified, replace the solenoid valve.
9. INSPECT SHIFT SOLENOID VALVE SR
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance: