LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(a) Hold the differential case in a vise between aluminum plates.
NOTICE:
Do not overtighten the vise.
(b) Using SST, remove the case bearing inner race LH and RH from the differential case.
SST : 09950-40011
09951-04020
09952-04010
09953-04030
09954-04010
09955-04061
09957-04010
09958-04011
SST : 09950-60010
09951-00350
09951-00480
09952-06010
NOTICE:
*
Do not deform the bearing cage if the bearing is to be reused.
*
Hook SST claw from the recess of the differential case to the bearing inner race.
*
Apply grease to the threads and tip of SST center bolt before use.
30. INSPECT DIFFERENTIAL SIDE GEAR BACKLASH
(a) Hold the differential case in a vise between aluminum plates.
NOTICE:
Do not overtighten the vise.
(b) Place a dial indicator on the tip of the pinion gear tooth at a right angle. Hold the side gear in the differential case and check that the backlash
is 0 mm (0 in.).