LS 460 RWD V8-4.6L (1UR-FSE) (2010)
NOTICE:
As the differential case bolts are plastic region tightening bolts, do not reuse them.
(g) Temporarily tighten the 10 differential case bolts uniformly in several passes, and then tighten them to the torque specification.
Torque : 64 Nm (652 kgf-cm, 47 ft-lbf)
NOTICE:
*
Tighten the bolts after the ring gear has sufficiently cooled down.
*
Install the differential case bolts by tightening diametrically opposite pairs uniformly in several passes.
(h) Tighten the bolts further by 60° to 90°.
NOTICE:
Tighten the bolts in diametrically opposite pairs.
2. INSTALL REAR DIFFERENTIAL CASE BEARING
(a) Using SST and a press, press in the case bearing inner race LH and RH to the differential case.
SST : 09950-60010
09951-00560
09951-00570
SST : 09950-70010
09951-07100