LS 460 RWD V8-4.6L (1UR-FSE) (2010)
(b) Fix the companion flange in place, and measure the ring gear backlash.
Standard backlash:
0.08 to 0.13 mm (0.0031 to 0.0051 in.)
NOTICE:
Measure at 3 or more areas around the circumference of the ring gear.
38. INSPECT RUNOUT OF DIFFERENTIAL DRIVE PINION
(a) Using a dial indicator, measure the runout of the drive pinion shaft at a position 10 mm (0.39 in.) from the end of the shaft.
Maximum runout:
0.08 mm (0.0031 in.)
39. INSTALL REAR DRIVE PINION NUT
(a) Using a chisel and a hammer, stake the drive pinion nut.
SST : 09930-00010