LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Exterior View Display Monitor: Service and Repair
Installation
PRE-COLLISION: DRIVER MONITOR CAMERA: INSTALLATION
INSTALLATION
1. INSTALL DRIVER MONITOR CAMERA
(a) Attach the 2 claws to install the camera.
(b) Install the camera with the 3 screws.
Torque: 1.8 Nm (18 kgf-cm, 16 in-lbf)
2. INSTALL DRIVER MONITOR BRACKET
(a) Attach the claw to install the bracket.
(b) Install the screw.
Torque: 0.9 Nm (9.0 kgf-cm, 8.0 in-lbf)
3. INSTALL STEERING COLUMN COVER
(a) Connect the connector.
(b) Attach the claw and 4 clips to install the cover.