LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Emergency Battery: Service and Repair
Removal
CELLULAR COMMUNICATION: MAYDAY BATTERY: REMOVAL
REMOVAL
1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
2. REMOVE BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
-
After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
-
When disconnecting the cable some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization.
4. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit (for Rear Side)/Removal
5. REMOVE BATTERY SERVICE HOLE COVER
6. REMOVE ROPE HOOK ASSEMBLY
7. REMOVE ROPE HOOK
8. REMOVE DECK TRIM SIDE BOARD RH
9. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
11. REMOVE REAR FLOOR FINISH PLATE
12. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH
13. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
14. REMOVE MAYDAY BATTERY
(a) Disconnect the 2 connectors.
(b) Remove the nut, upper bracket and battery.