LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Garage Door Opener Transmitter: Service and Repair
Removal
GARAGE DOOR OPENER: GARAGE DOOR OPENER TRANSMITTER: REMOVAL
REMOVAL
1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
2. REMOVE BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE:
-
After the power switch is turned off, the HDD navigation system requires approximately 6 minutes to record various types of memory and
settings. As a result, after turning the power switch off, wait 6 minutes or more before disconnecting the cable from the negative (-) battery
terminal.
-
When disconnecting the cable some systems need to be initialized after the cable is reconnected See: Testing and Inspection/Programming
and Relearning/Repair Instruction - Initialization.
4. REMOVE MAP LIGHT ASSEMBLY
(a) Remove the map light See: Lighting and Horns/Map Light/Service and Repair/Removal.
5. REMOVE GARAGE DOOR OPENER TRANSMITTER
(a) Disconnect the connector.
(b) Remove the 2 screws and remove the garage door opener transmitter.