LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
1. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Removal
2. REMOVE FRONT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY LH See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Service and Repair/Removal
3. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Removal
4. REMOVE SEAT MEMORY SWITCH
(a) Disconnect the connector.
(b) Detach the 4 claws and remove the seat memory switch.
Installation
SEAT: SEAT MEMORY SWITCH (for Front Side): INSTALLATION
INSTALLATION
1. INSTALL SEAT MEMORY SWITCH
(a) Attach the 4 claws to install the switch.
(b) Connect the connector.
2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Installation
3. INSTALL FRONT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY LH See: Body and Frame/Doors, Hood and
Trunk/Doors/Front Door/Service and Repair/Installation
4. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Service and
Repair/Installation