LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
2. INSPECT REAR NO. 2 SPEAKER ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the speaker assembly.
3. INSPECT REAR NO. 3 SPEAKER ASSEMBLY
(a) Check that the malfunction disappears when the speaker is replaced with a normal one.
OK:
Malfunction disappears.
HINT:
-
Connect all the connectors to the rear No. 3 speakers.
-
When there is a possibility that either the right or left rear speaker is defective, inspect by interchanging the right one with the left one.
-
Perform the inspection above on both LH and RH sides.
Instrument Panel Speaker
AUDIO / VISUAL: INSTRUMENT PANEL SPEAKER: INSPECTION
INSPECTION
1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the speaker assembly.