LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Trunk / Liftgate Spring: Service and Repair
Installation
ENGINE HOOD / DOOR: LUGGAGE DOOR HINGE TORSION BAR: INSTALLATION
INSTALLATION
HINT:
-
The installation should be performed in the order of LH to RH.
-
After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door can open and close
smoothly.
1. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT
(a) Squeeze the two sides of the torsion bar support indicated by the arrows and install it as shown in the illustration.
2. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH
(a) Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and body LH side
SST: 09804-24010
(b) Set the tip of the luggage door hinge torsion bar LH in the installation hole in the center. The upper and lower holes are used for adjustment.