LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
74. REMOVE POWER STEERING LINK ASSEMBLY
(a) Remove the 2 bolts, 2 nuts, 2 washers and power steering link from the front frame.
75. REMOVE FRONT NO. 2 SUSPENSION LOWER ARM LH
(a) Remove the clip and nut.
(b) Install 2 spacers (SST spacer A) onto the front No. 2 suspension lower arm LH so that there is a space of approximately 1 mm (0.0394 in.)
between the arm and spacers.
SST: 09960-20010
09961-02050
NOTICE:
-
Make sure to install the spacers (SST spacer A) as the steering knuckle spacer may shift.
-
As SST may become damaged, make sure the space between the arm and spacers is not less than 1 mm (0.0394 in.).
(c) Using SST, disconnect the front No. 2 suspension lower arm LH from the front lower ball joint assembly LH.
SST: 09960-20010
09961-02010
NOTICE:
-
Do not damage the dust cover of the No. 2 lower arm.
-
As the dust cover may be damaged, adjust SST with the center nut so that the body and claw are parallel.