LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
-
If the result is not as specified, replace the door lock assembly.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
-
If the result is not as specified, replace the door lock assembly.
(c) w/ Door Closer:
Inspect the closer motor operation.
(1) Set the front door with motor lock assembly RH to the half latch position.
(2) When battery voltage is applied as shown below to the terminals of connector B of the front door with motor lock assembly RH, check the
operation of the door closer.
OK:
-
If the result is not as specified, replace the door lock assembly.