LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. REMOVE REAR DOOR INSIDE HANDLE BEZEL PLUG LH See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal
2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Removal
3. REMOVE REAR DOOR TRIM BOARD SUB-ASSEMBLY LH See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Removal
4. REMOVE REAR SEAT MEMORY SWITCH
(a) Detach the 4 claws, and disconnect the connector and then remove the rear seat memory switch.
Installation
SEAT: SEAT MEMORY SWITCH (for Rear Side): INSTALLATION
INSTALLATION
HINT:
-
Use the same procedures for the LH side and RH side.
-
The procedures listed below are for the LH side.
1. INSTALL REAR SEAT MEMORY SWITCH
(a) Attach the 4 claws to install the rear seat memory switch.
(b) Connect the connector.
2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Installation
3. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY See: Doors, Hood and Trunk/Doors/Rear Door/Service and
Repair/Installation
4. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH See: Doors, Hood and Trunk/Doors/Rear Door/Service and Repair/Installation