LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-3150006.png)
Removal
SEAT: REAR POWER SEAT MOTOR ASSEMBLY (for Power Seat): REMOVAL
REMOVAL
CAUTION: Wear protective gloves. Sharp areas on the seatback spring, seat adjuster and seat cushion spring may injure your hands.
NOTE: If the rear seat adjuster is inspected or replaced, or the initialization cancel operation is performed, the position sensor initialization
must be performed See: Testing and Inspection/Programming and Relearning/Rear Power Seat Control System.
HINT: Before removing the rear seat adjuster, slide the rear power seat so that the front end of the rear seat cushion is 37 mm (1.46 in.) from
the rearmost position.
1. REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
2. REMOVE BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
