LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTE: Do not allow the anchor part of the rear seat 3 point type belt assembly to overlap the protruding parts of the floor panel.
15. INSTALL REAR SEAT CUSHION ASSEMBLY RH See: Service and Repair/Rear Seat Assembly (for Power Seat)/Installation
16. INSTALL REAR SEAT CUSHION ASSEMBLY LH See: Service and Repair/Rear Seat Assembly (for Power Seat)/Installation
17. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
18. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
19. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
20. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
21. INSPECT REAR SEAT ASSEMBLY
(a) Check the power seat operation See: Testing and Inspection/Component Tests and General Diagnostics/Rear Power Seat Control System.
(b) Check the climate control seat system See: Testing and Inspection/Component Tests and General Diagnostics/Climate Control Seat System.