lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Lumbar Support Adjuster Assembly|Page 13809 > < Lumbar Support Adjuster Assembly|Page 13807
Page 10
background image

(g) Detach the 3 pieces of fastening tape on the top of the seatback. Then using a clip remover, detach the clip.

(h) Detach the 2 claws and disconnect the air hose connector.
(i) Remove the 2 nuts on the lower part of the seatback, and disconnect the rear No. 1 seat adjuster connection. Pull the lower part of the seatback

towards the front of the vehicle to disconnect the air duct from the vehicle.

(j) Lift the seatback assembly upwards to remove it.

NOTE: Be careful not to damage the vehicle body.

10. REMOVE REAR NO. 2 SEAT ADJUSTER ASSEMBLY

(a) Remove the 4 bolts, nut and seat adjuster.
(b) Disconnect the air duct from the vehicle body.

Lumbar Support Adjuster Assembly|Page 13809 > < Lumbar Support Adjuster Assembly|Page 13807