LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
INSPECTION PROCEDURE
PROCEDURE
1. CHECK FUSE (P-IG1-4, P RR S/HTR)
(a) Remove the P-IG1-4 and P RR S/HTR fuses from the passenger side junction block.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE FUSE
OK -- Continue to next step.
2. CHECK HARNESS AND CONNECTOR (SEAT CLIMATE CONTROL ECU RH - BATTERY AND BODY GROUND)
(a) Disconnect the f8 ECU connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
Standard voltage: