LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
1. REMOVE REAR SEAT ASSEMBLY (for Fixed Seat Type)
(a) Remove the rear seat assembly See: Service and Repair/Rear Seat Assembly (for Fixed Seat Type)/Removal.
2. REMOVE REAR CENTER SEAT ARMREST ASSEMBLY (for Fixed Seat Type) See: Service and Repair/Rear Seat Assembly (for Fixed Seat
Type)/Disassembly
3. REMOVE REAR CENTER NO. 1 SEAT ARMREST PANEL (for Fixed Seat Type) See: Service and Repair/Rear Seat Assembly (for Fixed Seat
Type)/Disassembly
4. REMOVE CURTAIN SWITCH ASSEMBLY (for Fixed Seat Type)
(a) Remove the 8 screws and rear No. 2 seat center armrest box.
(b) Remove the 2 screws and curtain switch.
(c) Disconnect the connector.
Installation
SEAT: SEAT HEATER SWITCH (for Rear Side): INSTALLATION
INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart See: Specifications/Mechanical Specifications/Standard Bolt -
Specified Torque For Standard Bolts.
1. INSTALL CURTAIN SWITCH ASSEMBLY (for Fixed Seat Type)
(a) Connect the connector.
(b) Install the curtain switch with the 2 screws.