LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
NOTICE:
-
After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. REMOVE INSTRUMENT SIDE PANEL LH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal
5. REMOVE NO. 1 INSTRUMENT CLUSTER MOULDING See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
6. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
7. REMOVE LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Detach the 2 claws and remove the luggage door opening switch.
Installation
ENGINE HOOD / DOOR: LUGGAGE DOOR OPENING SWITCH: INSTALLATION
INSTALLATION
1. INSTALL LUGGAGE DOOR OPENING SWITCH ASSEMBLY
(a) Attach the 2 claws to install the door opening switch.
2. INSTALL NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service
and Repair/Installation
3. INSTALL NO. 1 INSTRUMENT CLUSTER MOULDING See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Installation
4. INSTALL INSTRUMENT SIDE PANEL LH See: Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
6. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery