LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-1973002.png)
15. REMOVE NO. 1 CONSOLE BOX DUCT
(a) Detach the connector clamp.
(b) Remove the 2 clips and No. 1 duct.
16. REMOVE YAW RATE SENSOR
(a) Remove the 2 bolts and sensor.
(b) Disconnect the sensor connector.
NOTICE:
-
Make sure the yaw rate sensor's identification number is 1.
-
Do not drop the yaw rate sensor. If it is dropped, do not use it.
