LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Cruise Control Switch: Service and Repair
Installation
CRUISE CONTROL: CRUISE CONTROL MAIN SWITCH: INSTALLATION
INSTALLATION
1. INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY
(a) Install the switch.
(b) Install the 2 screws.
(c) Connect the connector and clamp.
2. INSTALL STEERING PAD See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
3. INSTALL SWITCH AND VOLUME CASE See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering Pad/Installation
4. INSTALL LOWER NO. 2 STEERING WHEEL COVER See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Steering
Pad/Installation
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
6. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
7. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
8. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.