LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
5. REMOVE ROPE HOOK ASSEMBLY
6. REMOVE DECK TRIM SIDE BOARD RH
7. REMOVE REAR FLOOR FINISH PLATE
8. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
9. REMOVE NO. 1 COOLER COVER (w/ Rear Cooler) See: Heating and Air Conditioning/Housing Assembly HVAC/Service and Repair/Air
Conditioning Unit (for Rear Side)/Removal
10. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER
11. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH
12. REMOVE OBJECT RECOGNITION ECU
(a) Disconnect the 2 connectors.
(b) Remove the 2 bolts.
(c) Detach the 2 clips and remove ECU.
NOTE: Do not drop the ECU or subject it to strong shocks.
Installation
CRUISE CONTROL: OBJECT RECOGNITION ECU: INSTALLATION
INSTALLATION
1. INSTALL OBJECT RECOGNITION ECU
(a) Attach the 2 clips.
(b) Install the ECU with the 2 bolts.
Torque: 7.4 Nm (76 kgf-cm, 66 in-lbf)
(c) Connect the 2 connectors.
NOTE: Do not use an ECU which has been dropped or subjected to any strong shocks.