LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Radiator Cooling Fan Control Module: Service and Repair
Installation
2UR-FSE COOLING: COOLING FAN ECU: INSTALLATION
INSTALLATION
1. INSTALL COOLING FAN ECU
(a) Install the ECU with the 2 screws.
Torque: 2.5 Nm (25 kgf-cm, 22 in-lbf)
(b) Connect the 3 connectors.
2. INSTALL NO. 1 AIR CLEANER INLET See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation
3. INSTALL AIR CLEANER INLET COVER SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
4. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine/Service and Repair/Removal and Replacement/Engine Assembly/Installation