LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
2. REMOVE AIR CLEANER INLET COVER SUB-ASSEMBLY See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
3. REMOVE NO. 1 AIR CLEANER INLET See: Service and Repair/Removal and Replacement/Engine Assembly/Removal
4. REMOVE INTAKE AIR CONNECTOR PIPE See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
5. REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY RH
(a) Disconnect the 2 camshaft timing control motor connectors.
(b) Remove the bolt and engine wire bracket.
(c) Remove the 3 bolts and camshaft timing control motor.
NOTE: Do not allow foreign matter to contact the oil seal face of the camshaft timing control motor (connecting surface with timing chain
cover).
(d) Remove the O-ring from the timing chain cover.
6. REMOVE CAM TIMING CONTROL WITH EDU MOTOR ASSEMBLY LH
(a) Disconnect the 2 camshaft timing control motor connectors and wire harness clamp.