LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Timing Cover: Specifications
Timing Chain Cover
Install the timing chain cover straight pin.
Using a plastic-faced hammer, tap in new straight pins to the timing chain cover.
Standard protrusion: ......................................................................................................................................................... 5.5 to 6.5 mm (0.217 to 0.256 in.)
Timing Chain Cover Stud Bolt
Install the timing chain cover stud bolt.
Using an E8 "TORX" socket wrench, install the 2 stud bolts as shown in the illustration.
Torque: ..................................................................................................................................................................................... 10 Nm (102 kgf-cm, 7 ft-lbf)