LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Ambient Temperature Sensor / Switch HVAC: Service and Repair
Installation
AIR CONDITIONING: AMBIENT TEMPERATURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL AMBIENT TEMPERATURE SENSOR
(a) Attach the clamp to install the sensor.
(b) Connect the connector.
2. INSTALL FRONT BUMPER COVER
(a) Install the front bumper cover See: Body and Frame/Bumper/Front Bumper/Service and Repair/Installation.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE: When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. INSTALL BATTERY SERVICE HOLE COVER LH See: Starting and Charging/Battery
5. INSTALL LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY
6. CHECK SRS WARNING LIGHT
(a) Check the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.