LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-2537010.png)
NOTE: If reusing the evaporator, do not insert the sensor into a location where the sensor was previously inserted. Insert the sensor within
range C shown in the illustration.
(a) Install the sensor as shown in the illustration.
(b) Attach the clamp.
2. INSTALL EVAPORATOR SUB-ASSEMBLY
(a) Install the evaporator.
(b) Attach the 3 claws to install the front cooling unit case.
(c) Install the 6 screws.
(d) Install new butyl tape and packing.
