LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(b) Remove the battery shield contact from the HV battery.
(c) Remove the 2 nuts, clamp and wire harness protector.
(d) Release the claw, remove the 2 nuts and separate the frame wire from the luggage room junction block.
(e) Remove the connector, release the 4 claws and separate the frame wire from the HV battery.
20. SEPARATE INVERTER WITH CONVERTER ASSEMBLY
CAUTION: Wear insulating gloves.
(a) Remove the bolt and separate the frame wire from the inverter with converter assembly.
NOTE: Cover the hole where the cable was connected with tape or equivalent (non-residue type) to prevent entry of foreign matter.
21. REMOVE WIRE HARNESS PROTECTOR