LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
21. INSTALL FRONT CENTER FLOOR COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
22. INSTALL INVERTER COVER ASSEMBLY RH
(a) Align the locating hole of the inverter cover assembly RH with the locating pin of the inverter with converter assembly. Set the inverter cover
assembly RH to the inverter with converter assembly.
(b) Press the positions where the clips are to secure the inverter cover assembly RH to the inverter with converter assembly.
23. INSTALL MOTOR CABLE COVER RH
(a) Install the motor cable cover RH with the 2 clips.
24. INSTALL COWL TOP VENTILATOR LOUVER RH
(a) Install the hood to cowl top seal with the 4 clips.
(b) Install the cowl top ventilator louver RH with the 6 clips.
25. INSTALL FRONT UPPER FENDER PROTECTOR RH
HINT: Use the same procedures described for the LH side See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Installation.
26. INSTALL ENGINE ROOM SIDE COVER RH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
27. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
28. INSTALL V-BANK COVER SUB-ASSEMBLY See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation