LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Bolt - Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
Nut (Except HV battery junction block assembly terminal) - Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
Nut (HV battery junction block assembly terminal) - Torque: 9.0 Nm (92 kgf-cm, 80 in-lbf)
NOTE: Be sure to follow the order when tightening the nuts and bolt.
4. INSTALL HYBRID VEHICLE CONVERTER See: Power Control System/Voltage Converter/Service and Repair/Hybrid Vehicle
Converter/Installation
5. INSTALL UPPER HV BATTERY COVER SUB-ASSEMBLY See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/HV
Battery/Installation
6. INSTALL CONDENSER See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/HV Battery/Installation
7. INSTALL NO. 1 HV BATTERY COVER INTAKE DUCT See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/HV
Battery/Installation
8. INSTALL POWER STEERING CONVERTER WIRE See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/HV
Battery/Installation
9. INSTALL NO. 1 HV BATTERY SHIELD SUB-ASSEMBLY See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/HV
Battery/Installation
10. INSTALL HV BATTERY
See: Battery System, Hybrid Drive/Battery, Hybrid Drive/Service and Repair/HV Battery/Installation