LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Example:
-
[A] - Ignition SW on
-
[B] - Ignition SW and SW1 on
-
[C] - Ignition SW, SW1 and Relay on (SW2 off)
Using a voltmeter, connect the negative lead to a good ground point or negative battery terminal, and the positive lead to the connector or component
terminal.
This check can be done with a test light instead of a voltmeter.
Disconnection of Male and Female Connectors
DISCONNECTION OF MALE AND FEMALE CONNECTORS
To pull apart the connectors, pull on the connector itself, not the wire harness.
HINT: Check to see what kind of connector you are disconnecting before pulling apart.
How to Replace Terminal
HOW TO REPLACE TERMINAL(with terminal retainer or secondary locking device)