LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH See: Dashboard / Instrument Panel/Service and Repair/Removal
5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH See: Dashboard / Instrument Panel/Service and Repair/Removal
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Removal
7. REMOVE NO. 3 BOX PANEL See: Dashboard / Instrument Panel/Service and Repair/Removal
8. REMOVE REAR UPPER CONSOLE PANEL See: Dashboard / Instrument Panel/Service and Repair/Removal
9. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Removal
10. REMOVE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service
and Repair/Radio Receiver/Removal
11. REMOVE NO. 1 CLEARANCE WARNING BUZZER
(a) Disconnect the connector.
(b) Detach the clamp and remove the clearance warning buzzer.
Installation
PARK ASSIST / MONITORING: CLEARANCE WARNING BUZZER (for Front Side): INSTALLATION
INSTALLATION
1. INSTALL NO. 1 CLEARANCE WARNING BUZZER
(a) Attach the clamp and install the clearance warning buzzer.
(b) Connect the connector.
2. INSTALL RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Radio/Stereo/Service
and Repair/Radio Receiver/Installation
3. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY See: Dashboard / Instrument Panel/Service and Repair/Installation