LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE CENTER STOP LIGHT ASSEMBLY
15. READ VALUE USING INTELLIGENT TESTER OR TECHSTREAM (STOP LIGHT SWITCH)
(a) Using the intelligent tester or Techstream, read the Data List.
(1) Intelligent tester
BODY NO. 4
(2) Techstream
Body No. 4
OK:
Condition sign can be displayed.
NG -- INSPECT STOP LIGHT SWITCH ASSEMBLY
OK -- REPLACE LUGGAGE ROOM JUNCTION BLOCK (REAR JUNCTION BLOCK ECU)
16. INSPECT STOP LIGHT SWITCH ASSEMBLY
(a) Remove the stop light switch See: Service and Repair/Removal.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPLACE STOP LIGHT SWITCH ASSEMBLY
OK -- Continue to next step.
17. CHECK HARNESS AND CONNECTOR (BATTERY - STOP LIGHT SWITCH)