LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Ambient Light Sensor: Service and Repair
Removal
LIGHTING: AUTOMATIC LIGHT CONTROL SENSOR: REMOVAL
REMOVAL
1. REMOVE INSTRUMENT PANEL SAFETY PAD
HINT: Refer to the procedures up to "REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY" See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal.
2. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Disassembly
3. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Disassembly
4. REMOVE DEFROSTER NOZZLE ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Disassembly
5. REMOVE AUTOMATIC LIGHT CONTROL SENSOR
(a) Disconnect the connector.
(b) Detach the 2 claws and remove the automatic light control sensor.