LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
NG -- REPLACE LUGGAGE ROOM JUNCTION BLOCK (REAR JUNCTION BLOCK ECU)
OK -- Continue to next step.
10. CHECK HARNESS AND CONNECTOR (REAR COMBINATION LIGHT - REAR JUNCTION BLOCK ECU AND BODY GROUND)
(a) Disconnect the S64 ECU connector.
(b) Disconnect the S51 and S52 light connectors.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
for LH
for RH
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- REPLACE REAR COMBINATION LIGHT ASSEMBLY
11. CHECK REAR JUNCTION BLOCK ECU (STP3 VOLTAGE)