LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Fluid - CVT: Service and Repair
L110F HYBRID TRANSMISSION / TRANSAXLE: HYBRID TRANSMISSION FLUID: ADJUSTMENT
ADJUSTMENT
1. BEFORE REFILLING TRANSMISSION
-
This transmission requires Toyota Genuine ATF WS.
-
After servicing the transmission, you must refill the transmission with the correct amount of fluid.
-
If fluid has seeped out or an oil cooler hose has been disconnected, proceed to "FILL TRANSMISSION PAN". If any of the entire transmission,
transmission pan, drain plug, transmission wire or oil pressure switches is replaced, proceed to "FILL TRANSMISSION".
-
Maintain the vehicle in a horizontal position while adjusting the fluid level.
-
If the entire transmission is replaced, proceed to the "PERFORM FLUID CIRCULATION" procedure.
HINT: New transmissions are already filled with transmission fluid.
2. FILL TRANSMISSION PAN
NOTICE:
-
Fill with ATF while the transmission is at normal operating temperature.
-
After filling ATF, adjust the fluid level.
(a) Lift the vehicle up while keeping the vehicle level.
(b) Disconnect the oil cooler hose.
NOTE: Do not touch any high temperature parts, such as the exhaust pipe.
HINT: Cover the disconnected oil cooler hose with a plastic bag or tape to prevent fluid from dripping.
(c) Add fluid until it comes out of the disconnected oil cooler hose.