LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER (w/ Antenna): INSTALLATION
INSTALLATION
1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY (w/ Antenna)
(a) Connect the receiver connector.
(b) Install the receiver with the nut.
Torque: 7.5 Nm (77 kgf-cm, 66 in-lbf)
2. INSTALL ROOF HEADLINING ASSEMBLY
(a) Install the roof headlining See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation.
3. INSPECT TIRE PRESSURE WARNING SYSTEM
(a) Inspect the tire pressure warning system See: Testing and Inspection/Programming and Relearning/Registration.