LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Parts Information
Refer to the "Instrument Panel Wire Harness Part Number Identification" section in this TSIB to determine the correct part number to order for the
vehicle.
Required Tools & Equipment
Diagnostic Procedure: DTC B18611B1866
1. Using Techstream confirm that DTC B1861 or B1866 is present or in history.
2. Disconnect the negative (-) battery terminal.
CAUTION
Work must be started more than 90 seconds AFTER the ignition switch is turned to the LOCK position and the negative (-) terminal cable is
disconnected from the battery. (The SRS is equipped with a back-up power source. If work is started within 90 seconds from disconnecting the
negative (-) terminal cable of the battery, the SRS may deploy.)
3. Disconnect the knee airbag squib.