LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
(a) Measure the resistance according to the value(s) in the table below.
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (HYBRID VEHICLE CONTROL ECU - NO. 1
JUNCTION CONNECTOR)
OK -- REPLACE HYBRID VEHICLE CONTROL ECU
12. CHECK FOR SHORT IN CAN BUS WIRES (NO. 1 JUNCTION CONNECTOR - NO. 2 JUNCTION CONNECTOR)
(a) Disconnect the L97 No. 2 junction connector connector.
(b) Measure the resistance according to the value(s) in the table below.
Result
NG -- REPAIR OR REPLACE CAN MAIN WIRE OR CONNECTOR (NO. 1 JUNCTION CONNECTOR - NO. 2 JUNCTION
CONNECTOR)
OK -- Continue to next step.
13. CONNECT CONNECTOR
(a) Reconnect the A67 No. 1 junction connector connector.
(b) Reconnect the L97 No. 2 junction connector connector.
NEXT -- Continue to next step.
14. CHECK FOR SHORT IN CAN BUS WIRES (NO. 3 JUNCTION CONNECTOR SIDE)