lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 5007 > < Initial Inspection and Diagnostic Overview|Page 5005
Page 62
background image

NG -- CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 1 METER ECU)
OK -- REPAIR OR REPLACE NO. 2 JUNCTION CONNECTOR

24. CHECK FOR SHORT TO GND IN CAN BUS WIRE (MAIN BODY ECU)

(a) Disconnect the L11 main body ECU connector.
(b) Measure the resistance according to the value(s) in the table below.

Result

NG -- REPAIR OR REPLACE CAN BRANCH WIRE CONNECTED TO MAIN BODY ECU (CANH, CANL)
OK -- REPLACE MAIN BODY ECU

25. CHECK FOR SHORT TO GND IN CAN BUS WIRE (NO. 1 METER ECU)

(a) Disconnect the L10 No. 1 meter ECU connector.
(b) Measure the resistance according to the value(s) in the table below.

Result

Initial Inspection and Diagnostic Overview|Page 5007 > < Initial Inspection and Diagnostic Overview|Page 5005