LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
INSPECTION PROCEDURE
HINT: Operating the power switch, any switches or any doors triggers related ECU and sensor communication with the CAN, which causes
resistance variation.
PROCEDURE
1. CHECK HARNESS AND CONNECTOR (CENTER AIRBAG SENSOR - BATTERY AND BODY GROUND)
(a) Disconnect the L73 center airbag sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(c) Measure the voltage according to the value(s) in the table below.
Standard voltage: