LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Air Flow Meter/Sensor: Service and Repair
Installation
2UR-FSE ENGINE CONTROL SYSTEM: MASS AIR FLOW METER: INSTALLATION
INSTALLATION
HINT: When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.
1. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 1)
(a) Install the MAF meter with the 2 screws.
Torque: 0.8 Nm (8 kgf-cm, 7 in-lbf)
-
If the screw is tightened excessively, the screw hole may be damaged.
-
Make sure the O-ring is not pinched.
2. INSTALL MASS AIR FLOW METER SUB-ASSEMBLY (for Bank 2)
(a) Install the MAF meter with the 2 screws.
Torque: 0.8 Nm (8 kgf-cm, 7 in-lbf)
-
If the screw is tightened excessively, the screw hole may be damaged.
-
Make sure the O-ring is not pinched.
3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY LH
(a) Install the air cleaner cap.
for hose clamp - Torque: 3.8 Nm (38 kgf-cm, 34 in-lbf)
HINT: Insert the protrusion of the air cleaner hose into the hole of the hose clamp.
4. INSTALL AIR CLEANER CAP SUB-ASSEMBLY RH