LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
REMOVAL
HINT: When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.
1. REMOVE ENGINE AND TRANSMISSION
(a) Remove the engine and transmission See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal.
2. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
(a) Disconnect the sensor connector.
(b) Using SST, remove the sensor from the exhaust manifold LH.
SST: 09224-00010
3. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)
(a) Disconnect the sensor connector.
(b) Using SST, remove the sensor from the exhaust manifold RH.
SST: 09224-00010
Installation
2UR-FSE ENGINE CONTROL SYSTEM: AIR FUEL RATIO SENSOR: INSTALLATION
INSTALLATION
HINT: When viewed from the rear of the engine assembly, Bank 1 is on the left side and Bank 2 is on the right side.
1. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)
(a) Using SST, install the sensor to the exhaust manifold LH.