LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Fuel Pressure Sensor/Switch: Service and Repair
Removal
2UR-FSE FUEL: FUEL PRESSURE SENSOR: REMOVAL
REMOVAL
1. DISCHARGE FUEL SYSTEM PRESSURE
(a) Discharge fuel system pressure See: Service Precautions/Fuel System.
2. REMOVE INTAKE MANIFOLD
(a) Remove the intake manifold See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair/Removal.
3. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY See: Fuel Injector/Service and Repair/Fuel Injector (for Direct Injection)/Removal
4. REMOVE FUEL PRESSURE SENSOR
(a) Disconnect the sensor connector.
(b) Remove the sensor and gasket.