LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
_hybrid/Page-1497001.png)
Fuel Pump Ballast Resistor: Service and Repair
Installation
2UR-FSE FUEL: FUEL PUMP RESISTOR: INSTALLATION
INSTALLATION
1. INSTALL FUEL PUMP RESISTOR
(a) Install the resistor with the bolt.
Torque: 5.0 Nm (51 kgf-cm, 44 in-lbf)
(b) Connect the resistor connector.
2. INSTALL ENGINE ROOM SIDE COVER LH See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Installation
