LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Fuel Pump Relay: Testing and Inspection
Fuel Pump Relay
2UR-FSE ENGINE CONTROL SYSTEM: FUEL PUMP RELAY: ON-VEHICLE INSPECTION
ON-VEHICLE INSPECTION
1. REMOVE FUEL PUMP RELAY (F/PMP)
(a) Remove the fuel pump relay from the engine room No. 2 relay block.
2. INSPECT FUEL PUMP RELAY
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:
If the result is not as specified, replace the relay.
3. INSTALL FUEL PUMP RELAY