LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Fuel Tank Pressure Sensor: Service and Repair
Installation
2UR-FSE EMISSION CONTROL: FUEL TANK PRESSURE SENSOR: INSTALLATION
INSTALLATION
1. INSTALL FUEL TANK BREATHER TUBE GASKET
(a) Install a new gasket, fuel tank EVAP tube support plate and fuel tank protector plate with the 4 screws.
2. INSTALL FUEL PRESSURE SENSOR
(a) Install the sensor to the fuel tank vent tube set plate.
NOTE: Check that there are no scratches or foreign objects on the connecting parts.
(b) Fix the sensor in place with the tube joint clip.
NOTICE:
Check that the tube joint clip is inserted securely.
-
After installing the tube joint clip, check that the sensor can not be pulled off.
-
Be careful not to damage the tube joint clip. If the tube joint clip is damaged, replace it.
(c) Connect the sensor connector.
3. INSTALL NO. 3 FUEL TANK PROTECTOR