LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
Fluid Pressure Sensor/Switch: Service and Repair
Removal
L110F HYBRID TRANSMISSION / TRANSAXLE: OIL PRESSURE SWITCH: REMOVAL
REMOVAL
1. REMOVE FRONT CENTER FLOOR COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. DRAIN TRANSMISSION FLUID
(a) Remove the drain plug and gasket, and drain the ATF.
(b) Install a new gasket and the drain plug.
Torque: 20 Nm (204 kgf-cm, 15 ft-lbf)
3. REMOVE TRANSMISSION OIL PAN SUB-ASSEMBLY
(a) Remove the 6 bolts, oil pan and gasket from the transmission.
(b) Remove the 2 transmission oil cleaner magnets from the oil pan.
(1) Collect any steel chips with the removed magnets. Carefully look at the foreign objects and particles in the pan and on the magnets to guess
the type of wear which might be found in the transmission.
Steel (magnetic): bearing, gear and clutch plate wear
Brass (non-magnetic): bush wear
4. REMOVE OIL STRAINER ASSEMBLY