LS 600h V8-5.0L (2UR-FSE) Hybrid (2008)
NOTICE:
-
After the power switch is turned OFF, the HDD navigation system requires approximately 6 minutes to record various types of memory
and settings. As a result, after turning the power switch OFF, wait 6 minutes or more before disconnecting the cable from the negative (-)
battery terminal.
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
4. REMOVE INSTRUMENT PANEL FINISH PANEL END RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
5. REMOVE INSTRUMENT SIDE PANEL RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
6. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal
7. REMOVE LOWER INSTRUMENT PANEL See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Front Passenger Side Knee
Airbag Assembly/Removal
8. REMOVE LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Front Passenger Side Knee Airbag Assembly/Removal
9. REMOVE NO. 2 CLUSTER MOULDING See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal
10. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal
11. REMOVE SUSPENSION CONTROL ECU See: Relays and Modules - Steering and Suspension/Relays and Modules - Suspension/Suspension
Control Module/Service and Repair/Suspension Control ECU/Removal
12. REMOVE CLEARANCE WARNING ECU WITH BRACKET
(a) Disconnect the clearance warning ECU connectors.
NOTE: Do not forcibly disconnect the connector.
(b) Remove the bolt, nut and ECU with bracket.
13. REMOVE CLEARANCE WARNING ECU